CAMINHÃO DE SUÇÃO DE ESGOTO SINOTRUK HOWO

The sewage suction truck is mainly used to suck, transport, unload, and load sewage and sludge existing in the sewer lines and rainwater wells, and it can also be used to suck and transport wastewater, industrial waste oil, and sewage in large factories. Furthermore, sometimes it can even be used to dredge and clean small watercourses.

Modelos:


Model:	ZZ1257V5247B1
Drive type:	6X4 Left Hand Drive
Wheel base (mm):	5200+1350
Engine model:	WP12.400E201, 400HP EURO II
Engine model:		4-stroke direct injection , 6-cylinder in-line with water cooling, turbo-charging and inter-cooling
Power output:	400HP
Torque output:	1780N.m
Emission (ml)	11596CC

Vitrines de produtos:

Aplicação

O Caminhão de sucção de esgoto SINOTRUK HOWO has Petrochemical Industry‌: Waste liquid and material treatment for a clean production environment.‌Metal Processing‌: Removal of metal chips, waste slag, and metal-laden wastewater to promote recycling.Cement Production‌: Reduction of dust pollution for smooth production.

SINOTRUK HOWO SEWAGE SUCTION TRUCK-new-1

SINOTRUK HOWO SEWAGE SUCTION TRUCK-new-2

SINOTRUK HOWO SEWAGE SUCTION TRUCK-new-3

Especificações:


Detail Technical Parameters:
Nome	Standard configuration
♦ Model:	ZZ1257V5247B1
♦ Drive type:	6X4 Left Hand Drive
♦ Wheel base (mm):	5200+1350
♦ Cab type:	Forward control over engine, all-steel-welded construction, tilting cab; rear points airbag suspensions.
♦ Cab type:		Heating and ventilating system with A/C.
♦ Engine model:	WP12.400E201, 400HP EURO II
♦ Engine model:		4-stroke direct injection , 6-cylinder in-line with water cooling, turbo-charging and inter-cooling
♦ Power output:	400HP
♦ Torque output:	1780N.m
♦ Emission (ml)	11596CC
♦ Brakes:	Dual independent circuit fully pneumatic with automatic slack adjusters, Spring loaded hand brake
♦ Transmission gear:	HW19710 gear box with 10 forward and 2 reverse
♦ Front axle:	Drum brake 9000kg
♦ Rear axle:	Drum brake, 16000kg*2
♦ Clutch ( mm):	Reinforced diaphragm clutch, diameter 430 mm
♦ Fuel tank (L):	400
♦ Tyre:	315/80R22.5 tubeless tires,11 pcs including 1 spare tire
♦ Dimension (mm)	10300x2600x3800(mm)
♦ Gross Vehicle Weight:(kg)	25000
♦ Kerb Weight:(kg)	14500
♦ Maximum Speed:(km/h)	90
B. Vacuum Tank
Nome	Standard configuration
♦ Tank volume	20,000 Liters
♦ Material:	Carbon steel
♦ Shell Body:	6 mm nominal thickness
♦ End Plate	6 mm nominal thickness
♦ Baffle Plate	6 mm nominal thickness
♦ Tank shape:	Ellipse
♦ Compartment:	One compartment
♦ Compartment:		(multi-compartment are available)
♦ Strengthen ring:	Cool blended U shape. Add the strengthen ring on the tank out circle.
♦ Tipping hydraulic:	For convenient tipping at 45 degree angle, one heavy tipping hydraulic pump is fixed.
♦ Shell Finish:	Shot blasted with 1 anti rust, 1 base coat and 1 finishing coat, the color of tank is according to customer requirement.
♦ Safety support	fix with safety valve during working
♦ Lever detector	Fix one lever detector on the rear of the tank for clearing the sullage.
♦ Over Pressure device	Fixed on the top of the tank
♦ Vacuum valve	For keeping the tank's inside vacuum
♦ Sewage discharge valve	The stainless steel discharge valve is fixed on the rear used for keeping the tank's rear clean
Nome	Standard configuration
♦ Operation:	Opened by hydraulic
♦ Safety:	Automatic testing hydraulic valve
♦ Lock device:	Manual locking device
♦ Seal:	Rigidity and manual synthetic rubber seal rings
♦ Water discharge valve	one way 100mm ball valve
C. Rear Cover:
Vacuum Pump system	Standard configuration
♦ Model:	Famous Chinese brand
♦ Max vacuum:	≥-0.098Mpa
♦ pumping rate	300 m3/h
♦ Speed:	1500 r/mm
♦ Driving Power approximately	15 KW
Suction Pipeline system	Standard configuration
♦ Diameter:	100mm(4”)
♦ Material	PVC spire strengthen hose
♦ Accessories	4” single way valve
♦ PIPING work	All the pipe are fixed on the top, even when the tank is tipping, it is still able to work
D. Vacuum Pump and Suction Pipeline:
Nome	Standard configuration
♦ Control	Provide all easy control system
♦ Assembly	All the controlling devices and where to be fixed are all confirmed
♦ Assembly		after we talked with our customers
♦ Control	All the control devices are in one water proof box.
♦ Marks	Make clear marks on the necessary places of the whole truck
E. Control:
Nome	Standard configuration
♦ Outside Sandblasting	all the steel and stainless steel parts are sandblasted before painting
♦ Painting	Primer and final painting
♦ Logo	paint customer's logo
♦ Training	Two free day training in our factory
♦ Others tools	Hydraulic jack with wheel wrench
F. Painting & Traning:
Nome	Standard configuration
♦ Outside Sandblasting	all the steel and stainless steel parts are sandblasted before painting
♦ Painting	Primer and final painting
♦ Logo	paint customer's logo
♦ Training	Two free day training in our factory
♦ Others tools	Hydraulic jack with wheel wrench


Detail Technical Parameters:
Nome	Standard configuration
♦ Model:	ZZ1257V5247B1
♦ Drive type:	6X4 Left Hand Drive
♦ Wheel base (mm):	5200+1350
♦ Cab type:	Forward control over engine, all-steel-welded construction, tilting cab; rear points airbag suspensions.
♦ Cab type:		Heating and ventilating system with A/C.
♦ Engine model:	WP12.400E201, 400HP EURO II
♦ Engine model:		4-stroke direct injection , 6-cylinder in-line with water cooling, turbo-charging and inter-cooling
♦ Power output:	400HP
♦ Torque output:	1780N.m
♦ Emission (ml)	11596CC
♦ Brakes:	Dual independent circuit fully pneumatic with automatic slack adjusters, Spring loaded hand brake
♦ Transmission gear:	HW19710 gear box with 10 forward and 2 reverse
♦ Front axle:	Drum brake 9000kg
♦ Rear axle:	Drum brake, 16000kg*2
♦ Clutch ( mm):	Reinforced diaphragm clutch, diameter 430 mm
♦ Fuel tank (L):	400
♦ Tyre:	315/80R22.5 tubeless tires,11 pcs including 1 spare tire
♦ Dimension (mm)	10300x2600x3800(mm)
♦ Gross Vehicle Weight:(kg)	25000
♦ Kerb Weight:(kg)	14500
♦ Maximum Speed:(km/h)	90
B. Vacuum Tank
Nome	Standard configuration
♦ Tank volume	20,000 Liters
♦ Material:	Carbon steel
♦ Shell Body:	6 mm nominal thickness
♦ End Plate	6 mm nominal thickness
♦ Baffle Plate	6 mm nominal thickness
♦ Tank shape:	Ellipse
♦ Compartment:	One compartment
♦ Compartment:		(multi-compartment are available)
♦ Strengthen ring:	Cool blended U shape. Add the strengthen ring on the tank out circle.
♦ Tipping hydraulic:	For convenient tipping at 45 degree angle, one heavy tipping hydraulic pump is fixed.
♦ Shell Finish:	Shot blasted with 1 anti rust, 1 base coat and 1 finishing coat, the color of tank is according to customer requirement.
♦ Safety support	fix with safety valve during working
♦ Lever detector	Fix one lever detector on the rear of the tank for clearing the sullage.
♦ Over Pressure device	Fixed on the top of the tank
♦ Vacuum valve	For keeping the tank's inside vacuum
♦ Sewage discharge valve	The stainless steel discharge valve is fixed on the rear used for keeping the tank's rear clean
Nome	Standard configuration
♦ Operation:	Opened by hydraulic
♦ Safety:	Automatic testing hydraulic valve
♦ Lock device:	Manual locking device
♦ Seal:	Rigidity and manual synthetic rubber seal rings
♦ Water discharge valve	one way 100mm ball valve
C. Rear Cover:
Vacuum Pump system	Standard configuration
♦ Model:	Famous Chinese brand
♦ Max vacuum:	≥-0.098Mpa
♦ pumping rate	300 m3/h
♦ Speed:	1500 r/mm
♦ Driving Power approximately	15 KW
Suction Pipeline system	Standard configuration
♦ Diameter:	100mm(4”)
♦ Material	PVC spire strengthen hose
♦ Accessories	4” single way valve
♦ PIPING work	All the pipe are fixed on the top, even when the tank is tipping, it is still able to work
D. Vacuum Pump and Suction Pipeline:
Nome	Standard configuration
♦ Control	Provide all easy control system
♦ Assembly	All the controlling devices and where to be fixed are all confirmed
♦ Assembly		after we talked with our customers
♦ Control	All the control devices are in one water proof box.
♦ Marks	Make clear marks on the necessary places of the whole truck
E. Control:
Nome	Standard configuration
♦ Outside Sandblasting	all the steel and stainless steel parts are sandblasted before painting
♦ Painting	Primer and final painting
♦ Logo	paint customer's logo
♦ Training	Two free day training in our factory
♦ Others tools	Hydraulic jack with wheel wrench
F. Painting & Traning:
Nome	Standard configuration
♦ Outside Sandblasting	all the steel and stainless steel parts are sandblasted before painting
♦ Painting	Primer and final painting
♦ Logo	paint customer's logo
♦ Training	Two free day training in our factory
♦ Others tools	Hydraulic jack with wheel wrench

Característica:

1) It integrates sewage suction, sewage rotary filtration and self-drainage functions, reducing the number of vehicle trips, improving work efficiency, and reducing usage costs.

20000L JETTING AND CLEANING SEWAGE SUCTION TRUCK-new-10

20000L JETTING AND CLEANING SEWAGE SUCTION TRUCK-new-18

20000L JETTING AND CLEANING SEWAGE SUCTION TRUCK-new-17

2) The cylinder vacuum tank can be hydraulically lifted to 40-45 degrees. The rear door can be opened and closed hydraulically.

20000L JETTING AND CLEANING SEWAGE SUCTION TRUCK-new-15

20000L JETTING AND CLEANING SEWAGE SUCTION TRUCK-new-14

20000L JETTING AND CLEANING SEWAGE SUCTION TRUCK-new-13

3. Robust & Reliable Chassis
Built on a SINOTRUK HOWO chassis, the vehicle offers strong structural integrity, stability, and reliable performance under heavy loads and frequent daily use.

SINOTRUK HOWO SEWAGE SUCTION TRUCK-4

SINOTRUK HOWO SEWAGE SUCTION TRUCK-6

SINOTRUK HOWO SEWAGE SUCTION TRUCK-5

4. Efficient Hydraulic & Vacuum Control
Integrated hydraulic and vacuum systems allow smooth, stable operation of suction, discharge, and tank control functions for higher operational efficiency.

SINOTRUK HOWO SEWAGE SUCTION TRUCK-10

SINOTRUK HOWO SEWAGE SUCTION TRUCK-7

SINOTRUK HOWO SEWAGE SUCTION TRUCK-8

5. Flexible Tank Capacity Options
Available in various tank volumes (e.g., 4–20 CBM or more) to suit different sanitation requirements — from urban sewer cleaning to industrial waste handling.

SINOTRUK HOWO SEWAGE SUCTION TRUCK-10

SINOTRUK HOWO SEWAGE SUCTION TRUCK-7

SINOTRUK HOWO SEWAGE SUCTION TRUCK-4