CAMINHÃO DE SUÇÃO DE ESGOTO COM JATO E LIMPEZA DE 20.000 L

Septic Suction Truck is with advantage of self-suction from discharge, fast working speed, large capacity, convenient transportation suitable for the collection and transport of feces, mud, crude oil and other liquid materials.Also with advantage of large suction force and long suction distance, especially suitable for the suction, delivery and discharge of silt in the sewer, especially for the suction of the sewer mud, stones, bricks and other large objects.

20000L JETTING AND CLEANING SEWAGE SUCTION TRUCK-6

20000L JETTING AND CLEANING SEWAGE SUCTION TRUCK-8

20000L JETTING AND CLEANING SEWAGE SUCTION TRUCK-1

20000L JETTING AND CLEANING SEWAGE SUCTION TRUCK-9

20000L JETTING AND CLEANING SEWAGE SUCTION TRUCK-2

20000L JETTING AND CLEANING SEWAGE SUCTION TRUCK-5

20000L JETTING AND CLEANING SEWAGE SUCTION TRUCK-10

20000L JETTING AND CLEANING SEWAGE SUCTION TRUCK-4

20000L JETTING AND CLEANING SEWAGE SUCTION TRUCK-3

Modelos:


Modelo	ZZ1257V4647B1
Wheelbase	4600+1350(mm)
Overall demension	9200x2500x3780(mm)
Driving model	6X4, left hand drive
Motor	WP12.400E201, 400HP EURO II
Transmission	HW19710, 10 forwards and 2 reverses, with HW70 PTO
Front axle	9000KG
Rear axle	2*16000KG
Fuel tank	400L
Pneu	315/80R22.5 tire, in total 11 pieces including one spare tire

Vitrines de produtos:

Aplicação

O 20000 L Jetting and Cleaning Sewage Suction Truck foi projetado para fornecer efficient, powerful, and continuous sewer and drain cleaning performance by combining high-pressure jetting and vacuum suction systems into a single multifunctional sanitation vehicle. This integrated approach enables both clearing blockages and removing wastewater and sludge with high productivity — ideal for urban sanitation, municipal sewer maintenance, and industrial drainage tasks.

20000L JETTING AND CLEANING SEWAGE SUCTION TRUCK-new-6

20000L JETTING AND CLEANING SEWAGE SUCTION TRUCK-new-5

20000L JETTING AND CLEANING SEWAGE SUCTION TRUCK-new-9

Especificações:


Specifications for 20000L JETTING AND CLEANING SEWAGE SUCTION TRUCK
Chassis	Modelo	ZZ1257V4647B1
		Wheelbase	4600+1350(mm)
		Overall demension	9200x2500x3780(mm)
		Driving model	6X4, left hand drive
		Motor	WP12.400E201, 400HP EURO II
		Transmission	HW19710, 10 forwards and 2 reverses, with HW70 PTO
		Front axle	9000KG
		Rear axle	2*16000KG
		Fuel tank	400L
		Pneu	315/80R22.5 tire, in total 11 pieces including one spare tire
Septic Suction Tank	Septic Suction Tank Capacity	15000 Liters
		Material	Q235B, 6mm
		Internal support partition	Wave structure, fully welded with web plate, skirt structure at the bottom, size over 500mm.
		Rear sealing	Double flange design, flange thickness 30mm (increases depending on volume), weather-resistant rubber sealing ring.
		diversion trough	The brim is curved and deepened to prevent drips from falling onto the vehicle.
		Locking method	New brass-plated manual locking
		Sewage tank inlet	No side suction port; a high-level feed port is added to the rear end cap; specification: DN100; control method: manual.
		Sewage tank discharge port	Standard configuration: One DN150 low-position discharge port, located at the low position of the rear end cap.
		View sewage pipe	Quantity: 1 piece; Material: Acrylic glass;
		Ladder	A ladder is welded to one side of the operating valve.
		Storage rack/box	Quantity: 2 / Installation location: one on each side of the tank (equal in length to the tank) to be determined, ordinary carbon steel
		Overflow valve	The waste tank is equipped with an overflow prevention valve at the top, and the vacuum pump's air inlet is fitted with two stainless steel filter screens (to prevent contaminants from entering the pump).
		sewage suction pipe	Quantity: 1 piece; Length: 6 meters
Clean Water Tank	Clean Water Tank Capacity	4000 Liters, Equipped with a water and sewage interconnection function, with stainless steel filter screen
		Inlet	Ball valve type fire hydrant (easy to open and close, durable), with fire hose connection and pagoda-style washdown valve.
		High-pressure pump	The Pinfu 330 model with a self-developed large filter (no need to disassembly to clean, preventing impurities from entering the pump).
Vacuum pump system	power take-off	With PTO
		Transmission mode	PTO drive shaft
		Marca	Italian MEC11000 vacuum pump
		pump base	Made with thickened material
		Vacuum pump table	One pressure gauge with positive and negative scales, and one side of the four-way valve of the vacuum pump.
		Drain valve	The vacuum suction pump is equipped with a drain valve, and the pump base is designed to be at least 26 centimeters above the ground.
		Positive and negative pressure safety valves	Domestic
Process requirements	Internal tank processing	Epoxy resin anti-corrosion coating
Process requirements		Welding requirements	Three-dimensional gas shielded welding is used to ensure uniform and smooth welds, strong and reliable welds, and the absence of cracks, slag inclusions, burn-through, and incomplete welds, preventing water leakage and seepage.
Others	Protective device	Protective railings are installed on both sides and the rear of the tank; Material: Q235B carbon steel Rear mudguard: Metal mudguard, material: Q235B carbon steel
		Rear high-pressure hose reel	The triangular double-bolt fixing design ensures stability and reliability. The reel is enlarged and thickened (6mm), and features a rinsing function (allowing for rinsing of the high-pressure hose during retraction after operation).
		Lighting fixtures and signage	Side lights: Three side marker lights are installed along the lower edge of one side of the tank. The wiring harnesses for these lights must be sealed and secured, and must not be exposed. Reflective strips: These are affixed to the sides and rear of the vehicle, consisting of alternating red and white markings. The reflective strips should clearly indicate the width and length of the vehicle.


Specifications for 20000L JETTING AND CLEANING SEWAGE SUCTION TRUCK
Chassis	Modelo	ZZ1257V4647B1
		Wheelbase	4600+1350(mm)
		Overall demension	9200x2500x3780(mm)
		Driving model	6X4, left hand drive
		Motor	WP12.400E201, 400HP EURO II
		Transmission	HW19710, 10 forwards and 2 reverses, with HW70 PTO
		Front axle	9000KG
		Rear axle	2*16000KG
		Fuel tank	400L
		Pneu	315/80R22.5 tire, in total 11 pieces including one spare tire
Septic Suction Tank	Septic Suction Tank Capacity	15000 Liters
		Material	Q235B, 6mm
		Internal support partition	Wave structure, fully welded with web plate, skirt structure at the bottom, size over 500mm.
		Rear sealing	Double flange design, flange thickness 30mm (increases depending on volume), weather-resistant rubber sealing ring.
		diversion trough	The brim is curved and deepened to prevent drips from falling onto the vehicle.
		Locking method	New brass-plated manual locking
		Sewage tank inlet	No side suction port; a high-level feed port is added to the rear end cap; specification: DN100; control method: manual.
		Sewage tank discharge port	Standard configuration: One DN150 low-position discharge port, located at the low position of the rear end cap.
		View sewage pipe	Quantity: 1 piece; Material: Acrylic glass;
		Ladder	A ladder is welded to one side of the operating valve.
		Storage rack/box	Quantity: 2 / Installation location: one on each side of the tank (equal in length to the tank) to be determined, ordinary carbon steel
		Overflow valve	The waste tank is equipped with an overflow prevention valve at the top, and the vacuum pump's air inlet is fitted with two stainless steel filter screens (to prevent contaminants from entering the pump).
		sewage suction pipe	Quantity: 1 piece; Length: 6 meters
Clean Water Tank	Clean Water Tank Capacity	4000 Liters, Equipped with a water and sewage interconnection function, with stainless steel filter screen
		Inlet	Ball valve type fire hydrant (easy to open and close, durable), with fire hose connection and pagoda-style washdown valve.
		High-pressure pump	The Pinfu 330 model with a self-developed large filter (no need to disassembly to clean, preventing impurities from entering the pump).
Vacuum pump system	power take-off	With PTO
		Transmission mode	PTO drive shaft
		Marca	Italian MEC11000 vacuum pump
		pump base	Made with thickened material
		Vacuum pump table	One pressure gauge with positive and negative scales, and one side of the four-way valve of the vacuum pump.
		Drain valve	The vacuum suction pump is equipped with a drain valve, and the pump base is designed to be at least 26 centimeters above the ground.
		Positive and negative pressure safety valves	Domestic
Process requirements	Internal tank processing	Epoxy resin anti-corrosion coating
Process requirements		Welding requirements	Three-dimensional gas shielded welding is used to ensure uniform and smooth welds, strong and reliable welds, and the absence of cracks, slag inclusions, burn-through, and incomplete welds, preventing water leakage and seepage.
Others	Protective device	Protective railings are installed on both sides and the rear of the tank; Material: Q235B carbon steel Rear mudguard: Metal mudguard, material: Q235B carbon steel
		Rear high-pressure hose reel	The triangular double-bolt fixing design ensures stability and reliability. The reel is enlarged and thickened (6mm), and features a rinsing function (allowing for rinsing of the high-pressure hose during retraction after operation).
		Lighting fixtures and signage	Side lights: Three side marker lights are installed along the lower edge of one side of the tank. The wiring harnesses for these lights must be sealed and secured, and must not be exposed. Reflective strips: These are affixed to the sides and rear of the vehicle, consisting of alternating red and white markings. The reflective strips should clearly indicate the width and length of the vehicle.

Característica:

1) Suction device: adopt well-known brand vacuum pump (optional imported vacuum pump), high absolute working pressure, large flow, large suction power and long suction distance.

20000L JETTING AND CLEANING SEWAGE SUCTION TRUCK-new-10

20000L JETTING AND CLEANING SEWAGE SUCTION TRUCK-new-11

20000L JETTING AND CLEANING SEWAGE SUCTION TRUCK-new-12

2) High vacuum, powerful cleaning function, can effectively suction particles smaller than the diameter of the straw.

20000L JETTING AND CLEANING SEWAGE SUCTION TRUCK-new-13

20000L JETTING AND CLEANING SEWAGE SUCTION TRUCK-new-14

20000L JETTING AND CLEANING SEWAGE SUCTION TRUCK-new-15

3) Equipped with a quick-detachable straw, which greatly increases the working range.

20000L JETTING AND CLEANING SEWAGE SUCTION TRUCK-new-18

20000L JETTING AND CLEANING SEWAGE SUCTION TRUCK-new-17

20000L JETTING AND CLEANING SEWAGE SUCTION TRUCK-new-16

4. Powerful Vacuum Suction
Equipped with a high-capacity vacuum pump that generates strong negative pressure to quickly extract sewage, sludge, and slurry into the tank after jetting, ensuring thorough cleanup and preventing residual waste.

20000L JETTING AND CLEANING SEWAGE SUCTION TRUCK-6

20000L JETTING AND CLEANING SEWAGE SUCTION TRUCK-10

20000L JETTING AND CLEANING SEWAGE SUCTION TRUCK-3

5. Dual or Independent Control Modes
The jetting and suction systems can be operated independently or simultaneously, giving operators flexibility to adapt to varying sewer conditions and job requirements.

20000L JETTING AND CLEANING SEWAGE SUCTION TRUCK-new-22

20000L JETTING AND CLEANING SEWAGE SUCTION TRUCK-new-23

20000L JETTING AND CLEANING SEWAGE SUCTION TRUCK-new-24