bannière-arrière-plan-1

CAMION-CITERNE À JET ET À VIDE SINOTRUK HOWO

Le CAMION-CITERNE À JET ET À VIDE HOWO est principalement utilisé pour aspirer et transporter les eaux usées et les boues présentes dans les égouts et les puits d'eau de pluie. Il peut également être utilisé pour aspirer et transporter les eaux usées, les huiles usées industrielles et les eaux d'égout dans les grandes usines. En outre, il peut parfois être utilisé pour draguer et nettoyer de petits cours d'eau, ce qui représente un large éventail d'utilisations.

Modèles :

ModelZZ1167N4617B1
Wheelbase4600mm
Driving model4X2, left hand drive
EngineWP300.E22, 300HP, EU Ⅱ
TransmissionHW19710, 10 forward & 2 reverse, with PTO;
Front axle7100KG
Rear axle16000KG
Fuel tank400L
Tire295/80R22.5 tire, in total 7 pieces including one spare tire
Capacity10000 liters

Vitrines de produits :

Demande

Le SINOTRUK HOWO Jetting and Vacuum Tank Truck is engineered to deliver dual-function sewer cleaning performance by combining high-pressure water jetting and powerful vacuum suction systems in a single vehicle. This integrated configuration enables the truck to break up and flush blockages in sewer lines and drains while simultaneously sucking up the dirty water, sludge, and debris into onboard tanks for transport and disposal — significantly improving work efficiency for sanitation and infrastructure maintenance.

Spécifications :

Specifications for VACUUM SEWER TANK TRUCK
ChassisModelZZ1167N4617B1
Wheelbase4600mm
Driving model4X2, left hand drive
EngineWP300.E22, 300HP, EU Ⅱ
TransmissionHW19710, 10 forward & 2 reverse, with PTO;
Front axle7100KG
Rear axle16000KG
Fuel tank400L
Tire295/80R22.5 tire, in total 7 pieces including one spare tire
Sewage TankCapacity10000 liters
MaterialQ235B, 6mm
Internal support partitionWave structure, fully welded with web plate, skirt structure at the bottom, size over 500mm.
Rear sealingDouble flange design, flange thickness 30mm (increases depending on volume), weather-resistant rubber sealing ring.
diversion troughThe brim is curved and deepened to prevent drips from falling onto the vehicle.
Locking methodNew brass-plated manual locking
Sewage tank inletNo side suction port; a high-level feed port is added to the rear end cap; specification: DN100; control method: manual.
Sewage tank discharge portStandard configuration: One DN150 low-position discharge port, located at the low position of the rear end cap.
View sewage pipeQuantity: 1 piece; Material: Acrylic glass;
LadderA ladder is welded to one side of the operating valve.
Storage rack/boxQuantity: 2 / Installation location: one on each side of the tank (equal in length to the tank) to be determined, ordinary carbon steel
sewage suction pipeQuantity: 1 piece; Length: 6 meters
Vacuum pump systempower take-offWith PTO
Transmission modePTO drive shaft
BrandItaly pump JUPOR PN106
pump baseMade with thickened material
Vacuum pump tableOne pressure gauge with positive and negative scales, and one side of the four-way valve of the vacuum pump.
Positive and negative pressure safety valvesDomestic
Hydraulic control componentsTank LiftingBoth sides of the tank are raised
Rear end cap opening and closingFully open/close
Control methodMulti-way valve manual lever
gear pumpBrand: Hefei Wanye
Process requirementsInternal tank processingEpoxy resin anti-corrosion coating
Welding requirementsThree-dimensional gas shielded welding is used to ensure uniform and smooth welds, strong and reliable welds, and the absence of cracks, slag inclusions, burn-through, and incomplete welds, preventing water leakage and seepage.
Other requirementsprotective deviceProtective railings are installed on both sides and the rear of the tank;
Material: Q235B carbon steel
Rear mudguard: Metal mudguard, material: Q235B carbon steel
Lighting fixtures and signageSide lights: Three side marker lights are installed along the lower edge of one side of the tank. The wiring harnesses for these lights must be sealed and secured, and must not be exposed.
Reflective strips: These are affixed to the sides and rear of the vehicle, consisting of alternating red and white markings. The reflective strips should clearly indicate the width and length of the vehicle.
Specifications for VACUUM SEWER TANK TRUCK
ChassisModelZZ1167N4617B1
Wheelbase4600mm
Driving model4X2, left hand drive
EngineWP300.E22, 300HP, EU Ⅱ
TransmissionHW19710, 10 forward & 2 reverse, with PTO;
Front axle7100KG
Rear axle16000KG
Fuel tank400L
Tire295/80R22.5 tire, in total 7 pieces including one spare tire
Sewage TankCapacity10000 liters
MaterialQ235B, 6mm
Internal support partitionWave structure, fully welded with web plate, skirt structure at the bottom, size over 500mm.
Rear sealingDouble flange design, flange thickness 30mm (increases depending on volume), weather-resistant rubber sealing ring.
diversion troughThe brim is curved and deepened to prevent drips from falling onto the vehicle.
Locking methodNew brass-plated manual locking
Sewage tank inletNo side suction port; a high-level feed port is added to the rear end cap; specification: DN100; control method: manual.
Sewage tank discharge portStandard configuration: One DN150 low-position discharge port, located at the low position of the rear end cap.
View sewage pipeQuantity: 1 piece; Material: Acrylic glass;
LadderA ladder is welded to one side of the operating valve.
Storage rack/boxQuantity: 2 / Installation location: one on each side of the tank (equal in length to the tank) to be determined, ordinary carbon steel
sewage suction pipeQuantity: 1 piece; Length: 6 meters
Vacuum pump systempower take-offWith PTO
Transmission modePTO drive shaft
BrandItaly pump JUPOR PN106
pump baseMade with thickened material
Vacuum pump tableOne pressure gauge with positive and negative scales, and one side of the four-way valve of the vacuum pump.
Positive and negative pressure safety valvesDomestic
Hydraulic control componentsTank LiftingBoth sides of the tank are raised
Rear end cap opening and closingFully open/close
Control methodMulti-way valve manual lever
gear pumpBrand: Hefei Wanye
Process requirementsInternal tank processingEpoxy resin anti-corrosion coating
Welding requirementsThree-dimensional gas shielded welding is used to ensure uniform and smooth welds, strong and reliable welds, and the absence of cracks, slag inclusions, burn-through, and incomplete welds, preventing water leakage and seepage.
Other requirementsprotective deviceProtective railings are installed on both sides and the rear of the tank;
Material: Q235B carbon steel
Rear mudguard: Metal mudguard, material: Q235B carbon steel
Lighting fixtures and signageSide lights: Three side marker lights are installed along the lower edge of one side of the tank. The wiring harnesses for these lights must be sealed and secured, and must not be exposed.
Reflective strips: These are affixed to the sides and rear of the vehicle, consisting of alternating red and white markings. The reflective strips should clearly indicate the width and length of the vehicle.

Caractéristique :

1. Dual-Function Jetting and Vacuum System
Combines a high-pressure water jetting system with a powerful vacuum suction system in one vehicle, enabling simultaneous cleaning of blockages and removal of wastewater, sludge, and debris for efficient sewer maintenance.

2. High-Pressure Jetting Capability
Equipped with a high-pressure water jetting pump and hose assembly capable of delivering strong, adjustable water pressure to effectively dislodge grease, silt, sand, and other obstructions from pipelines and sewer lines.

3. Strong Vacuum Suction Performance
The integrated vacuum pump generates strong negative pressure to vacuum up waste liquids, sludge, and solids quickly and reliably, significantly reducing manual labor and improving cleaning efficiency.

4. Large Capacity Waste Water Tank
Features a large-volume tank that holds both the wastewater and solids collected during jetting and suction — reducing the frequency of stops to discharge waste and extending continuous operation.

5. Independent or Combined Operation Modes
The jetting and vacuum systems can be operated independently or simultaneously, giving operators flexibility to tailor performance to different sewer conditions and maintenance tasks.

Other Hot-Selling Products:

Demandez maintenant

Si nos produits vous intéressent, veuillez nous faire part immédiatement de vos besoins et nous mettrons à votre disposition des professionnels pour vous aider.

bannière-arrière-plan-1