CAMIÓN CISTERNA DE CHORRO Y VACÍO SINOTRUK HOWO

El HOWO JETTING AND VACUUM TANK TRUCK is mainly used to suck, transport sewage and sludge existing in the sewer lines and rainwater wells, and it can also be used to suck and transport wastewater, industrial waste oil, and sewage in large factories. Furthermore, sometimes it can even be used to dredge and clean small watercourses, which is in a widely usage range.

SINOTRUK HOWO JETTING AND VACUUM TANK TRUCK-6

SINOTRUK HOWO JETTING AND VACUUM TANK TRUCK-7

SINOTRUK HOWO JETTING AND VACUUM TANK TRUCK-1

SINOTRUK HOWO JETTING AND VACUUM TANK TRUCK-10

SINOTRUK HOWO JETTING AND VACUUM TANK TRUCK-9

SINOTRUK HOWO JETTING AND VACUUM TANK TRUCK-8

SINOTRUK HOWO JETTING AND VACUUM TANK TRUCK-2

SINOTRUK HOWO JETTING AND VACUUM TANK TRUCK-3

Modelos:


Model	ZZ1167N4617B1
Wheelbase	4600mm
Driving model	4X2, left hand drive
Engine	WP300.E22, 300HP, EU Ⅱ
Transmission	HW19710, 10 forward & 2 reverse, with PTO;
Front axle	7100KG
Rear axle	16000KG
Fuel tank	400L
Tire	295/80R22.5 tire, in total 7 pieces including one spare tire
Capacity	10000 liters

Vitrinas de productos:

Solicitud

El SINOTRUK HOWO Jetting and Vacuum Tank Truck is engineered to deliver dual-function sewer cleaning performance by combining high-pressure water jetting and powerful vacuum suction systems in a single vehicle. This integrated configuration enables the truck to break up and flush blockages in sewer lines and drains while simultaneously sucking up the dirty water, sludge, and debris into onboard tanks for transport and disposal — significantly improving work efficiency for sanitation and infrastructure maintenance.

SINOTRUK HOWO JETTING AND VACUUM TANK TRUCK-9

SINOTRUK HOWO JETTING AND VACUUM TANK TRUCK-10

SINOTRUK HOWO JETTING AND VACUUM TANK TRUCK-8

Especificaciones:


Specifications for VACUUM SEWER TANK TRUCK
Chassis	Model	ZZ1167N4617B1
		Wheelbase	4600mm
		Driving model	4X2, left hand drive
		Engine	WP300.E22, 300HP, EU Ⅱ
		Transmission	HW19710, 10 forward & 2 reverse, with PTO;
		Front axle	7100KG
		Rear axle	16000KG
		Fuel tank	400L
		Tire	295/80R22.5 tire, in total 7 pieces including one spare tire
Sewage Tank	Capacity	10000 liters
		Material	Q235B, 6mm
		Internal support partition	Wave structure, fully welded with web plate, skirt structure at the bottom, size over 500mm.
		Rear sealing	Double flange design, flange thickness 30mm (increases depending on volume), weather-resistant rubber sealing ring.
		diversion trough	The brim is curved and deepened to prevent drips from falling onto the vehicle.
		Locking method	New brass-plated manual locking
		Sewage tank inlet	No side suction port; a high-level feed port is added to the rear end cap; specification: DN100; control method: manual.
		Sewage tank discharge port	Standard configuration: One DN150 low-position discharge port, located at the low position of the rear end cap.
		View sewage pipe	Quantity: 1 piece; Material: Acrylic glass;
		Ladder	A ladder is welded to one side of the operating valve.
		Storage rack/box	Quantity: 2 / Installation location: one on each side of the tank (equal in length to the tank) to be determined, ordinary carbon steel
		sewage suction pipe	Quantity: 1 piece; Length: 6 meters
Vacuum pump system	power take-off	With PTO
		Transmission mode	PTO drive shaft
		Brand	Italy pump JUPOR PN106
		pump base	Made with thickened material
		Vacuum pump table	One pressure gauge with positive and negative scales, and one side of the four-way valve of the vacuum pump.
		Positive and negative pressure safety valves	Domestic
Hydraulic control components	Tank Lifting	Both sides of the tank are raised
		Rear end cap opening and closing	Fully open/close
		Control method	Multi-way valve manual lever
		gear pump	Brand: Hefei Wanye
Process requirements	Internal tank processing	Epoxy resin anti-corrosion coating
Process requirements		Welding requirements	Three-dimensional gas shielded welding is used to ensure uniform and smooth welds, strong and reliable welds, and the absence of cracks, slag inclusions, burn-through, and incomplete welds, preventing water leakage and seepage.
Other requirements	protective device	Protective railings are installed on both sides and the rear of the tank; Material: Q235B carbon steel Rear mudguard: Metal mudguard, material: Q235B carbon steel
Other requirements		Lighting fixtures and signage	Side lights: Three side marker lights are installed along the lower edge of one side of the tank. The wiring harnesses for these lights must be sealed and secured, and must not be exposed. Reflective strips: These are affixed to the sides and rear of the vehicle, consisting of alternating red and white markings. The reflective strips should clearly indicate the width and length of the vehicle.


Specifications for VACUUM SEWER TANK TRUCK
Chassis	Model	ZZ1167N4617B1
		Wheelbase	4600mm
		Driving model	4X2, left hand drive
		Engine	WP300.E22, 300HP, EU Ⅱ
		Transmission	HW19710, 10 forward & 2 reverse, with PTO;
		Front axle	7100KG
		Rear axle	16000KG
		Fuel tank	400L
		Tire	295/80R22.5 tire, in total 7 pieces including one spare tire
Sewage Tank	Capacity	10000 liters
		Material	Q235B, 6mm
		Internal support partition	Wave structure, fully welded with web plate, skirt structure at the bottom, size over 500mm.
		Rear sealing	Double flange design, flange thickness 30mm (increases depending on volume), weather-resistant rubber sealing ring.
		diversion trough	The brim is curved and deepened to prevent drips from falling onto the vehicle.
		Locking method	New brass-plated manual locking
		Sewage tank inlet	No side suction port; a high-level feed port is added to the rear end cap; specification: DN100; control method: manual.
		Sewage tank discharge port	Standard configuration: One DN150 low-position discharge port, located at the low position of the rear end cap.
		View sewage pipe	Quantity: 1 piece; Material: Acrylic glass;
		Ladder	A ladder is welded to one side of the operating valve.
		Storage rack/box	Quantity: 2 / Installation location: one on each side of the tank (equal in length to the tank) to be determined, ordinary carbon steel
		sewage suction pipe	Quantity: 1 piece; Length: 6 meters
Vacuum pump system	power take-off	With PTO
		Transmission mode	PTO drive shaft
		Brand	Italy pump JUPOR PN106
		pump base	Made with thickened material
		Vacuum pump table	One pressure gauge with positive and negative scales, and one side of the four-way valve of the vacuum pump.
		Positive and negative pressure safety valves	Domestic
Hydraulic control components	Tank Lifting	Both sides of the tank are raised
		Rear end cap opening and closing	Fully open/close
		Control method	Multi-way valve manual lever
		gear pump	Brand: Hefei Wanye
Process requirements	Internal tank processing	Epoxy resin anti-corrosion coating
Process requirements		Welding requirements	Three-dimensional gas shielded welding is used to ensure uniform and smooth welds, strong and reliable welds, and the absence of cracks, slag inclusions, burn-through, and incomplete welds, preventing water leakage and seepage.
Other requirements	protective device	Protective railings are installed on both sides and the rear of the tank; Material: Q235B carbon steel Rear mudguard: Metal mudguard, material: Q235B carbon steel
Other requirements		Lighting fixtures and signage	Side lights: Three side marker lights are installed along the lower edge of one side of the tank. The wiring harnesses for these lights must be sealed and secured, and must not be exposed. Reflective strips: These are affixed to the sides and rear of the vehicle, consisting of alternating red and white markings. The reflective strips should clearly indicate the width and length of the vehicle.

Característica:

1. Dual-Function Jetting and Vacuum System
Combines a high-pressure water jetting system with a powerful vacuum suction system in one vehicle, enabling simultaneous cleaning of blockages and removal of wastewater, sludge, and debris for efficient sewer maintenance.

HOWO TANK TRUCK WITH VACUUM PUMP-new-4

VACUUM SEWER TANK TRUCK-new-5

VACUUM SEWER TANK TRUCK-new-4

2. High-Pressure Jetting Capability
Equipped with a high-pressure water jetting pump and hose assembly capable of delivering strong, adjustable water pressure to effectively dislodge grease, silt, sand, and other obstructions from pipelines and sewer lines.

SINOTRUK HOWO JETTING AND VACUUM TANK TRUCK-1

SINOTRUK HOWO JETTING AND VACUUM TANK TRUCK-2

SINOTRUK HOWO JETTING AND VACUUM TANK TRUCK-3

3. Strong Vacuum Suction Performance
The integrated vacuum pump generates strong negative pressure to vacuum up waste liquids, sludge, and solids quickly and reliably, significantly reducing manual labor and improving cleaning efficiency.

SINOTRUK HOWO JETTING AND VACUUM TANK TRUCK-7

SINOTRUK HOWO JETTING AND VACUUM TANK TRUCK-8

SINOTRUK HOWO JETTING AND VACUUM TANK TRUCK-9

4. Large Capacity Waste Water Tank
Features a large-volume tank that holds both the wastewater and solids collected during jetting and suction — reducing the frequency of stops to discharge waste and extending continuous operation.

SINOTRUK HOWO JETTING AND VACUUM TANK TRUCK-6

SINOTRUK HOWO JETTING AND VACUUM TANK TRUCK-5

SINOTRUK HOWO JETTING AND VACUUM TANK TRUCK-2

5. Independent or Combined Operation Modes
The jetting and vacuum systems can be operated independently or simultaneously, giving operators flexibility to tailor performance to different sewer conditions and maintenance tasks.

SINOTRUK HOWO JETTING AND VACUUM TANK TRUCK-6

SINOTRUK HOWO JETTING AND VACUUM TANK TRUCK-1

SINOTRUK HOWO JETTING AND VACUUM TANK TRUCK-5