اتصل بنا:
راسلنا عبر البريد الإلكتروني:

A HOWO Tank Truck with Vacuum Pump هي مركبة صرف صحي متخصصة مصممة خصيصاً لـ efficient suction, collection, transport, and disposal of sewage, sludge, wastewater, and other liquid waste. Built on a reliable هيكل شاحنة HOWO, this vacuum sewer tanker integrates a high-power vacuum pump system with a large sealed storage tank. The vacuum system generates strong negative pressure to rapidly extract liquids and semi-solids from sewer lines, septic tanks, manholes, and drains.
| Model: | ZZ1257V4647B1 |
|---|---|
| Drive type: | 6X4 Left Hand Drive |
| Wheel base (mm): | 4600+1350 |
| Engine model: | WP10.340E, 340HP EURO II |
| 4-stroke direct injection , 6-cylinder in-line with water cooling, turbo-charging and inter-cooling | |
| Engine model: | WP10.340E, 340HP EURO II |
| 4-stroke direct injection , 6-cylinder in-line with water cooling, turbo-charging and inter-cooling | |
| Power output: | 340 حصاناً |
| Torque output: | 1250N.m |
ال HOWO Tank Truck with Vacuum Pump مصمم لتقديم robust, efficient, and reliable performance for municipal sewage suction, wastewater removal, and liquid waste transport applications. Built on a proven SINOTRUK HOWO chassis, the vehicle integrates a high-efficiency vacuum pump system with a large sealed tank to support demanding sanitation and environmental service operations.
| Detail Technical Parameters: | ||
|---|---|---|
| الاسم | Standard configuration | |
| Model: | ZZ1257V4647B1 | |
| Drive type: | 6X4 Left Hand Drive | |
| Wheel base (mm): | 4600+1350 | |
| Cab type: | Forward control over engine, all-steel-welded construction, tilting cab; rear points airbag suspensions. | |
| Heating and ventilating system with A/C. | ||
| Engine model: | WP10.340E, 340HP EURO II | |
| 4-stroke direct injection , 6-cylinder in-line with water cooling, turbo-charging and inter-cooling | ||
| Power output: | 340 حصاناً | |
| Torque output: | 1250N.m | |
| Emission (ml) | 9726CC | |
| Brakes: | Dual independent circuit fully pneumatic with automatic slack adjusters, Spring loaded hand brake | |
| Transmission gear: | HW19710 gear box with 10 forward and 2 reverse | |
| Front axle: | Drum brake 9000kg | |
| Rear axle: | Drum brake, 16000kg*2 | |
| Clutch ( mm): | Reinforced diaphragm clutch, diameter 430 mm | |
| Fuel tank (L): | 400 | |
| Tyre: | 315/80R22.5 tubeless tires,11 pcs including 1 spare tire | |
| Dimension (mm) | 10300x2550x3600(mm) | |
| Gross Vehicle Weight:(kg) | 25000 | |
| Kerb Weight:(kg) | 14000 | |
| Maximum Speed:(km/h) | 90 | |
| B. Vacuum Tank | ||
| الاسم | Standard configuration | |
| Tank volume | 20,000 Liters | |
| Material: | Carbon steel | |
| Shell Body: | 6 mm nominal thickness | |
| End Plate | 6 mm nominal thickness | |
| Baffle Plate | 6 mm nominal thickness | |
| Tank shape: | Ellipse | |
| Compartment: | One compartment | |
| (multi-compartment are available) | ||
| Strengthen ring: | Cool blended U shape. Add the strengthen ring on the tank out circle. | |
| Tipping hydraulic: | For convenient tipping at 45 degree angle, one heavy tipping hydraulic pump is fixed. | |
| Shell Finish: | Shot blasted with 1 anti rust, 1 base coat and 1 finishing coat, the color of tank is according to customer requirement. | |
| Safety support | fix with safety valve during working | |
| Lever detector | Fix one lever detector on the rear of the tank for clearing the sullage. | |
| Over Pressure device | Fixed on the top of the tank | |
| Vacuum valve | For keeping the tank's inside vacuum | |
| Sewage discharge valve | The stainless steel discharge valve is fixed on the rear used for keeping the tank's rear clean | |
| الاسم | Standard configuration | |
| Operation: | Opened by hydraulic | |
| Safety: | Automatic testing hydraulic valve | |
| Lock device: | Manual locking device | |
| Seal: | Rigidity and manual synthetic rubber seal rings | |
| Water discharge valve | one way 100mm ball valve | |
| C. Rear Cover: | ||
| Vacuum Pump system | Standard configuration | |
| Model: | Famous Chinese brand | |
| Max vacuum: | ≥-0.098Mpa | |
| pumping rate | 300 m3/h | |
| Speed: | 1500 r/mm | |
| Driving Power approximately | 15 KW | |
| Suction Pipeline system | Standard configuration | |
| Diameter: | 100mm(4”) | |
| Material | PVC spire strengthen hose | |
| Accessories | 4” single way valve | |
| PIPING work | All the pipe are fixed on the top, even when the tank is tipping, it is still able to work | |
| D. Vacuum Pump and Suction Pipeline: | ||
| الاسم | Standard configuration | |
| Control | Provide all easy control system | |
| Assembly | All the controlling devices and where to be fixed are all confirmed | |
| after we talked with our customers | ||
| Control | All the control devices are in one water proof box. | |
| Marks | Make clear marks on the necessary places of the whole truck | |
| E. Control: | ||
| الاسم | Standard configuration | |
| Outside Sandblasting | all the steel and stainless steel parts are sandblasted before painting | |
| Painting | Primer and final painting | |
| Logo | paint customer's logo | |
| Training | Two free day training in our factory | |
| Others tools | Hydraulic jack with wheel wrench | |
| F. Painting & Traning: | ||
| الاسم | Standard configuration | |
| Outside Sandblasting | all the steel and stainless steel parts are sandblasted before painting | |
| Painting | Primer and final painting | |
| Logo | paint customer's logo | |
| Training | Two free day training in our factory | |
| Others tools | Hydraulic jack with wheel wrench | |
| Detail Technical Parameters: | ||
|---|---|---|
| الاسم | Standard configuration | |
| Model: | ZZ1257V4647B1 | |
| Drive type: | 6X4 Left Hand Drive | |
| Wheel base (mm): | 4600+1350 | |
| Cab type: | Forward control over engine, all-steel-welded construction, tilting cab; rear points airbag suspensions. | |
| Heating and ventilating system with A/C. | ||
| Engine model: | WP10.340E, 340HP EURO II | |
| 4-stroke direct injection , 6-cylinder in-line with water cooling, turbo-charging and inter-cooling | ||
| Power output: | 340 حصاناً | |
| Torque output: | 1250N.m | |
| Emission (ml) | 9726CC | |
| Brakes: | Dual independent circuit fully pneumatic with automatic slack adjusters, Spring loaded hand brake | |
| Transmission gear: | HW19710 gear box with 10 forward and 2 reverse | |
| Front axle: | Drum brake 9000kg | |
| Rear axle: | Drum brake, 16000kg*2 | |
| Clutch ( mm): | Reinforced diaphragm clutch, diameter 430 mm | |
| Fuel tank (L): | 400 | |
| Tyre: | 315/80R22.5 tubeless tires,11 pcs including 1 spare tire | |
| Dimension (mm) | 10300x2550x3600(mm) | |
| Gross Vehicle Weight:(kg) | 25000 | |
| Kerb Weight:(kg) | 14000 | |
| Maximum Speed:(km/h) | 90 | |
| B. Vacuum Tank | ||
| الاسم | Standard configuration | |
| Tank volume | 20,000 Liters | |
| Material: | Carbon steel | |
| Shell Body: | 6 mm nominal thickness | |
| End Plate | 6 mm nominal thickness | |
| Baffle Plate | 6 mm nominal thickness | |
| Tank shape: | Ellipse | |
| Compartment: | One compartment | |
| (multi-compartment are available) | ||
| Strengthen ring: | Cool blended U shape. Add the strengthen ring on the tank out circle. | |
| Tipping hydraulic: | For convenient tipping at 45 degree angle, one heavy tipping hydraulic pump is fixed. | |
| Shell Finish: | Shot blasted with 1 anti rust, 1 base coat and 1 finishing coat, the color of tank is according to customer requirement. | |
| Safety support | fix with safety valve during working | |
| Lever detector | Fix one lever detector on the rear of the tank for clearing the sullage. | |
| Over Pressure device | Fixed on the top of the tank | |
| Vacuum valve | For keeping the tank's inside vacuum | |
| Sewage discharge valve | The stainless steel discharge valve is fixed on the rear used for keeping the tank's rear clean | |
| الاسم | Standard configuration | |
| Operation: | Opened by hydraulic | |
| Safety: | Automatic testing hydraulic valve | |
| Lock device: | Manual locking device | |
| Seal: | Rigidity and manual synthetic rubber seal rings | |
| Water discharge valve | one way 100mm ball valve | |
| C. Rear Cover: | ||
| Vacuum Pump system | Standard configuration | |
| Model: | Famous Chinese brand | |
| Max vacuum: | ≥-0.098Mpa | |
| pumping rate | 300 m3/h | |
| Speed: | 1500 r/mm | |
| Driving Power approximately | 15 KW | |
| Suction Pipeline system | Standard configuration | |
| Diameter: | 100mm(4”) | |
| Material | PVC spire strengthen hose | |
| Accessories | 4” single way valve | |
| PIPING work | All the pipe are fixed on the top, even when the tank is tipping, it is still able to work | |
| D. Vacuum Pump and Suction Pipeline: | ||
| الاسم | Standard configuration | |
| Control | Provide all easy control system | |
| Assembly | All the controlling devices and where to be fixed are all confirmed | |
| after we talked with our customers | ||
| Control | All the control devices are in one water proof box. | |
| Marks | Make clear marks on the necessary places of the whole truck | |
| E. Control: | ||
| الاسم | Standard configuration | |
| Outside Sandblasting | all the steel and stainless steel parts are sandblasted before painting | |
| Painting | Primer and final painting | |
| Logo | paint customer's logo | |
| Training | Two free day training in our factory | |
| Others tools | Hydraulic jack with wheel wrench | |
| F. Painting & Traning: | ||
| الاسم | Standard configuration | |
| Outside Sandblasting | all the steel and stainless steel parts are sandblasted before painting | |
| Painting | Primer and final painting | |
| Logo | paint customer's logo | |
| Training | Two free day training in our factory | |
| Others tools | Hydraulic jack with wheel wrench | |
1. Powerful Vacuum Suction System
مجهز بـ high-performance vacuum pump that creates strong negative pressure, enabling rapid and thorough suction of sewage, wastewater, sludge, and other liquid or semi-solid waste from septic tanks, sewer lines, and drain systems.
2. Large Sealed Tank Body
Features a robust, sealed storage tank with large capacity (commonly 8 m³–20 m³ or more) that securely holds collected waste without leakage or odor escape during transit, ensuring sanitary and environmentally friendly operation.
3. Durable HOWO Chassis & Engine
مبنية على أساس موثوق HOWO chassis with a powerful diesel engine (e.g., 290 HP and above), the vehicle delivers stable drivability and sufficient torque for both suction operations and transporting heavy liquid loads under varied road conditions.
4. Efficient Suction Workflow
The integrated vacuum system, pipes, and hoses allow smooth and efficient suction cycles, helping operators quickly connect to contamination sources and maintain high productivity for continuous sanitation tasks.
5.Equipped with overflow system with music speaker to prevent sewage from entering the vacuum pump and damaging the vacuum pump when the tank is full.
إذا كنت مهتمًا بمنتجاتنا، يرجى إرسال متطلباتك على الفور وسنقوم بترتيب خبراء محترفين لخدمتك.
